CONTROLS
Ignition Switch
The ignition key is placed on the control panel and is used to start and stop the engine.
Ignition switch
Choke Control
The choke control is used for cold starts in order to provide the engine with a richer fuel mixture.
For cold starts on models with separate choke, the control should be pulled up. On models with the a throttle/choke, the control should be pushed fully forward to the choke position.
Choke control
Fuses
Fuses are located on the left hand side of the machine. They are accessed by tilting the seat forward. They are flat pin fuses of the same type used in automobiles.
There are two fuses with ratings and functions:
20 Amp Primary fuse
7.5 Amp Mower deck coupling
Fuses |
20
