Husqvarna RZ4222F / 966659401 manual Turn to the start position, Return to run position, operation

Models: RZ4222F / 966659401 RZ4621 BF / 966676501 RZ4621 RZ4621 CA RZ4824F / 966678301 RZ4623 / 966678201 RZ5424 / 966659301

1 64
Download 64 pages 63.96 Kb
Page 27
Image 27
Turn to the start position

operation

Press in and turn the ignition key to the start position.

IMPORTANT INFORMATION

Do not run the starter for more than 5 seconds each time. If the engine does not start, wait approximately 10 seconds before retrying.

When the engine starts, immediately release the ignition key back to the run position.

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

8050-780

Turn to the start position

8050-781

Return to run position

Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle” for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING (no choke).

If your battery is too weak to start the engine, it should be recharged. (See “Battery” in the Maintenance Section.)

8058-134

Set the engine speed

27

Page 27
Image 27
Husqvarna RZ4222F / 966659401, RZ4621 Turn to the start position, Return to run position, Set the engine speed, operation