Husqvarna RZ5424 / 966659301, RZ4623 / 966678201 Weak Battery, Jumper cable connection, operation

Models: RZ4222F / 966659401 RZ4621 BF / 966676501 RZ4621 RZ4621 CA RZ4824F / 966678301 RZ4623 / 966678201 RZ5424 / 966659301

1 64
Download 64 pages 63.96 Kb
Page 28
Image 28
Weak Battery

operation

Weak Battery

WARNING!

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

IMPORTANT INFORMATION

 

Your mower is equipped with a 12-volt

 

negative grounded system. The other vehicle

 

must also be a 12-volt negative grounded

 

system. Do not use your mower to start other

 

vehicles.

 

If “jumper cables” are used for emergency starting,

 

follow this procedure:

 

Jumper Cables

 

• Connect each end of the RED cable to the

 

POSITIVE (+) terminal on each battery, taking

 

care not to short against chassis.

8011-642

• Connect one end of the BLACK cable to the

Jumper cable connection

 

NEGATIVE (-) terminal of the fully charged battery.

 

• Connect the other end of the BLACK cable to a

 

good CHASSIS GROUND on the mower with the

 

discharged battery, away from the fuel tank and

 

battery.

 

To remove cables, reverse order

Remove BLACK cable first from chassis and then from the fully charged battery.

Remove RED cable last from both batteries.

28

Page 28
Image 28
Husqvarna RZ5424 / 966659301, RZ4623 / 966678201, RZ4824F / 966678301 manual Weak Battery, Jumper cable connection, operation