Battery and Charging Options, NiMH Battery | Motorola CP100 specification

Battery and Charging Options

You have several battery and charging options on your CP100 Two-Way Radio.

NiMH Battery

See “Installing the Nickel-Metal Hydride Battery” on page 6.

Alkaline Batteries

Your radio can also use 4 AA batteries; alkaline cells provide up to 24 hours* of radio use.

1.Push the ribbed latch on the bottom of the radio away from the battery door.

2.Slide and lift the battery door off.

3.Place the AA batteries matching the markings in the compartment.

4.Slide and snap the battery door into place.

5.Press \ until A or n flashes.

6.Press [or ] to select A for alkaline batteries, or n for rechargeable AA cells.

Note: This menu does not appear if the Motorola NiMH Battery is in use.

*Please refer to the diagram and Battery Life on page 13.

CP100

A

Battery and Charging Options

11

Image 17

Motorola CP100 manual Battery and Charging Options, NiMH Battery, Alkaline Batteries

Contents

CP100 Page Table of Contents Frequencies and Bandwidths Product Safety and RF Exposure Compliance Product Safety and RF Exposure Compliance Introduction Package ContentsIntroduction USA/Canada FCC Licensing Information FCC Licensing Information FCC Licensing Information Getting Started Installing the Swivel Belt HolsterGetting Started Getting Started Charging the CP100 Radio Using the Radio Adjusting the VolumeStarted Turning Your Radio On or Off Monitor the frequency Use J to Understanding the Display Battery and Charging Options Battery and Charging OptionsNiMH Battery Alkaline Batteries NNTN4019 Charging with the Drop-in Charging Tray Battery Life BatteryReading the Battery Meter CP100 Factory Defaults CP100 Factory Defaults Talking and Receiving Signal Strength Indicator/Channel BusyTalking and Receiving Talk Range Hands-Free Use/VOX With Compatible VOX AccessoriesKeypad Lock Setting VOX Sensitivity Without AccessoriesReceiving Talking Monitoring a Channel Check for channel activity Scan Advancement / Nuisance Delete Entering Programming Mode Programming FeaturesProgramming Features Programming the Frequency Programming a Channel 15 ch models only Programming the Interference Eliminator Code Assigning Channels to Presets 15 ch models only Programming Bandwidth when FCC allowable Programming the Scramble Feature 2-watt models only Programming Call Tones Programming the Available Channel 15 ch models only Programming Microphone Gain Cloning Editing the Scan List 15 ch models only Source radio Target radio You turn on your radio Advanced FeaturesTurn Keypad Tones on/off Turn End-of-Transmission Tone on/off Restore Factory Defaults Turn Battery Save on/offToggle Phase Shift Symptom Try This TroubleshootingTroubleshooting Heavy static or Troubleshooting Symptom Try This If the radio is submerged in water Use and CareUse and Care VHF Frequencies Frequencies and Bandwidths UHF Frequencies Frequencies and Bandwidths 461.1375 Interference Eliminator Codes Digital Interference Eliminator Codes 100 101 102 103 104 105 106 107 108 109 Verifying the SP21 Frequency and Code Setting Motorola Limited Warranty Motorola Limited WarrantyII. What the Period of Coverage Is III. Who Is Covered Text Telephone IV. What We Will Do to Correct Warranty Problems VI. What this Warranty Does Not Cover VII. Some Other Limitations VIII. Patent and Software Provisions IX. State Law and Other Jurisdiction Rights Product Services 1-800-927-2744 All Products Patent Notice Software Copyright Notice Export Law Assurances Part Number Description Replacement PartsReplacement Parts Index Licensing information VOX CP100 Programming Quick Reference 15 CH Page 6804112J99