Programming Features
Programming the Interference Eliminator Code |
|
|
|
|
|
| |
The Interference Eliminator Code helps minimize interference by |
|
|
|
|
|
| |
|
|
|
|
|
| ||
providing you with code combinations, which filter out static, noise, |
|
|
|
|
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
| ||
and unwanted messages. | Interference | ||||||
1. | Enter Programming Mode as necessary, refer to “Entering | ||||||
| Programming Mode” on page 20. | Eliminator | |||||
| 01075 | ||||||
2. | Press \ until the Interference Eliminator Code display number | Code | |||||
|
|
|
|
|
| ||
| begins to flash. |
|
|
|
|
|
|
3. | Press [ or ] to select the desired Code (See “Interference Eliminator Codes” | ||||||
| beginning on page 37). |
|
|
|
|
|
|
4. | Press and hold M to exit k, or press \ to continue. |
|
|
|
|
|
|
Assigning Channels to Presets (15 ch models only)
Presets allow you to easily switch to more
1.Enter Programming Mode as necessary, refer to “Entering Programming Mode” on page 20.
2.Press [ or ] to select the desired channel.
3.Press and hold T or S to assign that channel to a preset, radio beeps to confirm. All of the channel settings are assigned to that preset button.
4.Press and hold M to exit k, or press \ to continue.
22
