Motorola CP100 manual Started, Turning Your Radio On or Off, Adjusting the Volume, Using the Radio

Turning Your Radio On or Off

Turn P clockwise for On or counterclockwise for Off.

	The radio chirps and the display briefly shows all features and display
	segments of your CP100 radio.	k	188
	Then the radio displays the current channel (larger number in the	218
	center) and the frequency assigned to that channel (on right).
	The interference eliminator code displays briefly. Then the current
	channel remains displayed.
	The transmit light on the front left of the radio flashes every three	Frequency
Started	seconds when the radio is on.
	volume or if it is at a high setting.	Code
	Adjusting the Volume
	You can set the volume by turning P.
	Note: Do not hold the radio too close to your ear when adjusting the
Getting	Using the Radio
	1. Press and hold Q to check for channel activity. If you hear static, the channel is
	clear to use. Do not transmit if someone is speaking on the channel. Press		Q
	again to stop monitoring the channel.
	2. Press and hold Mand speak into the microphone. To maximize clarity, hold the
	radio two-to-three inches away from your mouth.
	Note: The transmit light on the front left of the radio lights red when transmitting.
8
	3. Release M and listen for messages.