Programming Features, Entering Programming Mode | Motorola CP100

Programming Features

Programming Features

You can change the following features by entering the programming mode (k). To talk with someone on your two-way radios, these settings must match:

•Channel (15 ch models only)

•Frequency

•Interference Eliminator Code

•Scramble code

•Bandwidth (for optimal clarity)

You can also use k to set the following:

•Call tones

•Microphone Gain

•Scan List (15 ch models only)

•Available channels (15 ch models only)

Note: You cannot enter kwhile a VOX accessory is plugged into the radio.

Entering Programming Mode

You must enter Programming Mode to change your communication settings.

1. Press and hold MJ for three seconds while turning on your
radio. The radio beeps and displays k.	1
	1

20

Image 26

Motorola CP100 manual Programming Features, Entering Programming Mode

Contents

CP100 Page Table of Contents Frequencies and Bandwidths Product Safety and RF Exposure Compliance Product Safety and RF Exposure Compliance Introduction Package ContentsIntroduction USA/Canada FCC Licensing Information FCC Licensing Information FCC Licensing Information Getting Started Installing the Swivel Belt HolsterGetting Started Getting Started Charging the CP100 Radio Started Adjusting the VolumeUsing the Radio Turning Your Radio On or Off Use J to Monitor the frequency Understanding the Display NiMH Battery Battery and Charging OptionsBattery and Charging Options Alkaline Batteries Charging with the Drop-in Charging Tray NNTN4019 Battery Life BatteryReading the Battery Meter CP100 Factory Defaults CP100 Factory Defaults Talking and Receiving Signal Strength Indicator/Channel BusyTalking and Receiving Talk Range Hands-Free Use/VOX With Compatible VOX AccessoriesKeypad Lock Receiving Without AccessoriesSetting VOX Sensitivity Talking Monitoring a Channel Check for channel activity Scan Advancement / Nuisance Delete Entering Programming Mode Programming FeaturesProgramming Features Programming a Channel 15 ch models only Programming the Frequency Assigning Channels to Presets 15 ch models only Programming the Interference Eliminator Code Programming the Scramble Feature 2-watt models only Programming Bandwidth when FCC allowable Programming the Available Channel 15 ch models only Programming Call Tones Programming Microphone Gain Editing the Scan List 15 ch models only Cloning Source radio Target radio Turn Keypad Tones on/off Advanced FeaturesYou turn on your radio Turn End-of-Transmission Tone on/off Restore Factory Defaults Turn Battery Save on/offToggle Phase Shift Symptom Try This TroubleshootingTroubleshooting Heavy static or Troubleshooting Symptom Try This If the radio is submerged in water Use and CareUse and Care Frequencies and Bandwidths VHF Frequencies Frequencies and Bandwidths UHF Frequencies 461.1375 Interference Eliminator Codes Digital Interference Eliminator Codes 100 101 102 103 104 105 106 107 108 109 Verifying the SP21 Frequency and Code Setting II. What the Period of Coverage Is Motorola Limited WarrantyMotorola Limited Warranty III. Who Is Covered IV. What We Will Do to Correct Warranty Problems Text Telephone VI. What this Warranty Does Not Cover VII. Some Other Limitations VIII. Patent and Software Provisions Product Services 1-800-927-2744 All Products IX. State Law and Other Jurisdiction Rights Software Copyright Notice Patent Notice Export Law Assurances Part Number Description Replacement PartsReplacement Parts Index Licensing information VOX CP100 Programming Quick Reference 15 CH Page 6804112J99