Motorola CP100 manual Programming Features, Editing the Scan List 15 ch models only, Cloning

Programming Features

Editing the Scan List (15 ch models only)

To avoid hearing transmissions from unnecessary channels while scanning and to decrease scan time, you can edit the scan list to skip unneeded channels.

1.Enter Programming Mode as necessary, refer to “Entering Programming Mode” on page 20.

2.Press \ until h displays and the channel and Y or n flashes.

3.Press [ or ] to increase or decrease the channel.

4.Press J to display either:

Y to include the channel n to exclude the channel

5.Press and hold M to exit k.

Cloning

You can duplicate CP100 radio settings from one radio to another by using the optional accessory NNTN4028 Multi-Unit Charger (MUC). Please refer to the MUC User's Guide included with this accessory.

1.To enter the Programming Mode on the source radio, press and hold MQ for three seconds while turning on your radio. The radio beeps and displays k.

2.Place the source radio in one of the front pockets of the MUC.

26