Operating Instructions for Model TA36
5.Tighten the 1/2” bolt and 3/8” bolt securely. The 3/8” bolt will require the use of a 9/16” deep- well socket wrench to tighten.
6.Install tow bar by sliding bracket into frame and aligning the holes.
7.Insert four 3/8” X 1” bolts with four washers placed on outside of frame, and tighten securely with 3/8” lock nuts, using socket wrench.
8.Test operation of jack lift assembly by raising transport wheels to the highest position prior to tipping aerator into operating position. Lower transport wheels fully before tipping aerator.
9.Install the two 5” plastic tip wheels using the 1/2” bolts
10.Tighten the tip wheels securely. For added weight, fill the optional containers with sand or water. Up to six optional weight containers may