Husqvarna AR25, AR19 Tools Required, Parts Included, Operating Instructions for Model TA36

Operating Instructions for Model TA36

TOOLS REQUIRED:

2 each 3/4” wrenches

1 each 9/16” deep-well socket

1 each 9/16” wrench

PARTS INCLUDED:

Bolts: 1 each 3/8 x 1 hex w/nut

4 each 3/8 x 1 hex head w/nuts

3 each 1/2 x 3 hex head w/1 each 1/2" nut

Bushing:	5/8” x 9/16”
Washers:	2 each 1/2” SAE flat
	10 each 3/8” SAE flat

1.Check to see that all bolts, washers, and nuts are included in the plastic bag. Check for any signs of damage that may have occurred during shipment.

2.Tip aerator onto its back edge and install jack lift assembly. Install 5/8” X 9/16” bushing in hole “C” near end of the jack assembly before inserting into frame mount. Slide lift jack assem- bly between the two frame mount brackets and align frame mount hole “A” with lift assembly hole “B”.

3.Install 1/2” X 3” bolt and washer through frame mount and jack assembly. Add 1/2” lock nut with washer and tighten.

4.Align jack lift assembly hole “C” with clear- ance holes in frame and attach jack assembly to bracket on axle using 3/8” X 1 1/2” bolt and 3/8” washers and lock nut.

21