Setup & Adjustments

BRAKE / TRACTION ADJUSMENT

1.Disconnect the brake linkage from the brake band arm.

2.With the mower in gear, place the traction levers in the drive position. Firmly pull back on the handles until the tires slide to seat the wheel drive belts into the pulleys.

3.Measure the clearance between the bottom of the traction lever rod and the bottom of the thumb latch slot. It should be between 3/16" to 1/4", but not exceeding 1/4". See Figure # 3

O.P. LEVER

 

HANDLE

THUMB LATCH

 

TRACTION

 

LEVER

 

3/16" to 1/4" CLEARANCE

Figure 3

OPERATOR PRESENCE SWITCH ADJUSTMENT The operator presence switches can be adjusted by loosening the screws on the side of the O.P. lever linkage and sliding the switch up or down. The O.P. switch should have a 1/32" to 1/16" gap between the plunger and the bottom side of the control panel when operator presence levers are released.

BLADE SWITCH ADJUSTMENT

The blade engagement switch can be adjusted by loosening the screws on the flange under the control panel and moving the switch in or out. The blade switch should be adjusted so the plunger is fully depressed when the engagement lever is fully disen- gaged.

ADJUSTMENTS - DRIVE BELTS

For all drive belts, tension should be set so that belt vibration is minimized or eliminated when belts are moving during normal operation. A properly tensioned belt should have 1/4" to 3/8" deflection at the center of belt span between pulleys when blades are engaged. Blade drive belt tension is preset at the factory.

NOTE:

DO NOT over tighten belt. Excessive tension will decrease belt and spindle bearing life.

BLADE DRIVE BELT ADJUSTMENTS

WARNING

BEFORE PERFORMING ADJUSTMENTS ON BLADE BELT, TURN MOWER OFF, CLOSE FUEL VALVE, AND DISCONNECT SPARK PLUG WIRE.

4.If the clearance is less than 3/16", disconnect the traction rod from the traction lever by removing the hairpin cotter.

5.Adjust the traction rod to the proper clearance by screwing it out of the swivel if clearance is less than 3/16".

NOTE:

More or less brake pressure may be desired depend- ing on the operator or conditions of operation. To increase pressure tighten the wing nut on the brake linkage.

1.Remove front deck belt shield.

2.Loosen whiz nut on turnbuckle.

3.Set belt tension when engagement lever is in the engaged position.

4.To increase belt tension rotate turnbuckle toward the rear of the mower until desired tension is gained. Do not over tighten belts, to much tension will reduce belt and spindle bearing life. See figure # 6

5.Tighten whiz nut on turnbuckle and install belt shield.

AUXILIARYBLADEDRIVEBELT (48" MODELS ONLY)

To adjust tension of the auxiliary belt rotate nut on linkage that is attached to deck strap located on the right side of cutter deck.

8

Page 8
Image 8
Husqvarna W3213, WG4815P, W4815 manual Brake / Traction Adjusment, Blade Switch Adjustment, Adjustments Drive Belts

W4815, W3613, W3213, W4815, WG4815P, WG4815P, W3213 specifications

Husqvarna, a brand synonymous with high-quality outdoor power equipment, offers a range of powerful and efficient tools ideal for various landscaping needs. Among their notable products are the Husqvarna WG4815P, W3613, W3213, and W4815 models, each designed with advanced technologies and features to enhance user experience and performance.

The Husqvarna WG4815P is a versatile, gas-powered string trimmer that combines heavy-duty performance with user-friendly features. It is engineered with a robust 48cc engine that delivers impressive power for tackling tough jobs. One standout feature is the Smart Start technology, which ensures easy starting with minimal effort. The WG4815P also boasts an ergonomic design, allowing for comfortable handling during prolonged use.

Next, the Husqvarna W3613 is designed primarily for professional landscapers who demand reliability and efficiency. This model features a high-performance engine for increased torque and power, making it suitable for various applications, from grass trimming to tackling dense brush. The adjustable handle offers customizable comfort, while the dual-line cutting system provides a clean, effective cut every time, reducing the need for frequent maintenance.

The W3213 model continues the trend of reliability with its efficient design and lightweight construction, making it an excellent choice for residential users and beginners. Its easy-start engine, combined with an auto-return stop switch, ensures that it is ready to go whenever you are. The W3213 is particularly notable for its user-friendly controls, making it accessible for those new to outdoor maintenance.

Lastly, the Husqvarna W4815 stands out with its blend of innovative technology and superior performance. Featuring low-vibration technology, it minimizes user fatigue while ensuring precise control during operation. Its advanced cooling system prevents overheating, extending the lifespan of the engine and enhancing overall reliability. The W4815 is equipped with an efficient cutting head that can handle a variety of attachments, allowing for a more versatile gardening experience, from edging lawns to clearing overgrown areas.

All these models reflect Husqvarna's commitment to quality, durability, and performance. With their focus on advanced engineering and user-centric designs, these trimmers are perfect for both enthusiasts and professionals, offering a wide array of features that meet the demands of various landscaping tasks. Whether you choose the WG4815P, W3613, W3213, or W4815, you can be assured of high performance and exceptional results every time.