Husqvarna WH4817E, WH3615E Operation

English-23

OPERATION

Operation

Before Starting

• Read the sections Safety Instructions,

page 6, and Presentation, page 14,

before starting the machine.

• Perform the daily maintenance before

starting (see “Maintenance Schedule” on

page 34).

• Check that there is sufficient fuel in the

fuel tanks.

The following conditions must be fulfilled

before the engine can be started:

• The control for engaging the blades must

be in the disengaged position.

• The neutral bail for the drive levers must

be in the locked position.

WARNING!

Be thoroughly familiar with all

controls their function and how

to operate them before

operating the mower.

8011-668

isengaged blades

8011-416

eutral lock bail

WARNING!

Do not operate the mower if the

interlock safety system allows

operation or starting in any

unsafe condition.

Contents

Main Page OPERATORS MANUAL Contents MOWER WH3615E WH4817E Page INTRODUCTION Introduction Congratulations General Driving and Transport on Public Roads INTRODUCTION Good Service Manufacturing Number SYMBOLS AND DECALS Symbols and Decals SYMBOLS AND DECALS Safety Instructions General Use Page Driving on Slopes Children Maintenance Page Transport Customer responsibilities Controls Control Locations 1. Recoil Starter Grip 2. Ground Speed Lever 3. Motion control levers 4. Ignition Switch 5. Operator Presence Lever 6. Throttle Control 7. Brake/Bypass Lever 8. Blade Engagement Switch 9. Neutral Bail 10. Choke Control 11. Hour Meter 12. Tracking Knob Hour meter 13. Refueling cleaners in the fuel 14. Fuel Shut-off Valve Fuse Accessories Operation Before Starting Starting the Engine Page Driving forward Reversing To operate on hills with slopes greater than 10 degrees. And do not drive across any slopes. Mowing Tips Stopping Stopping the Engine Cutting height adjustment Page Moving by hand Maintenance Maintenance Schedule Page Ignition System Checking the Safety System Checking the Engine's Cooling Air Intake Checking and Adjusting the Throttle Cable Checking and Adjusting the Choke Cable Replacing the Air Filter Replacing the Fuel Filter Checking the Fuel Pumps Air Filter Checking Tire Pressures Checking the Parking Brake Checking the V-belts Checking the Blades Adjustment of the handle Cleaning and Washing Caster Wheels Hardware Blade replacement Lubrication Lubrication Schedule General 25h1/365 50h1/52 200h 300h100h12/12 Lubricating the Cables Lubricating in Accordance with the Lubrication Schedule Page Page Page TROUBLE SHOOTING GUIDE Trouble Shooting Guide Page Page STORAGE Storage Winter Storage Service WIRING DIAGRAM Wiring diagrams WIRING DIAGRAMS TECHNICAL DATA Technical Data TECHNICAL DATA Torque Specifications Page Service Journal Delivery Service After the First 8 Hours 25-Hour Service 50-Hour Service 100-Hour Service 300-Hour Service At Least Once Each Year