Husqvarna WH4817E, WH3615E Stopping the Engine

English-30

OPERATION

Stopping the Engine

Allow the engine to idle a minute in order to

attain normal operating temperature before

stopping it, if it has been worked hard. Avoid

idling the engine for longer periods, as there

is a risk of the spark plugs fouling.

1. Disengage the blades by depressing the

blade switch.

2. Move the throttle to the minimum position

(tortoise symbol). Turn the ignition key to

the stop position.

3. Remove the ignition key.

4. When the machine is standing still,

activate the parking brake by moving the

lever to the park brake position.

5. Shut OFF the fuel valve.

8011-655

isengage the blades

8011-664

hrottle and ignition key

8011-665

arking brake

8011-437

uel valve closed

IMPORTANT INFORMATION

Close fuel valve at the end of each mowing

job.

Contents

Main Page OPERATORS MANUAL Contents MOWER WH3615E WH4817E Page INTRODUCTION Introduction Congratulations General Driving and Transport on Public Roads INTRODUCTION Good Service Manufacturing Number SYMBOLS AND DECALS Symbols and Decals SYMBOLS AND DECALS Safety Instructions General Use Page Driving on Slopes Children Maintenance Page Transport Customer responsibilities Controls Control Locations 1. Recoil Starter Grip 2. Ground Speed Lever 3. Motion control levers 4. Ignition Switch 5. Operator Presence Lever 6. Throttle Control 7. Brake/Bypass Lever 8. Blade Engagement Switch 9. Neutral Bail 10. Choke Control 11. Hour Meter 12. Tracking Knob Hour meter 13. Refueling cleaners in the fuel 14. Fuel Shut-off Valve Fuse Accessories Operation Before Starting Starting the Engine Page Driving forward Reversing To operate on hills with slopes greater than 10 degrees. And do not drive across any slopes. Mowing Tips Stopping Stopping the Engine Cutting height adjustment Page Moving by hand Maintenance Maintenance Schedule Page Ignition System Checking the Safety System Checking the Engine's Cooling Air Intake Checking and Adjusting the Throttle Cable Checking and Adjusting the Choke Cable Replacing the Air Filter Replacing the Fuel Filter Checking the Fuel Pumps Air Filter Checking Tire Pressures Checking the Parking Brake Checking the V-belts Checking the Blades Adjustment of the handle Cleaning and Washing Caster Wheels Hardware Blade replacement Lubrication Lubrication Schedule General 25h1/365 50h1/52 200h 300h100h12/12 Lubricating the Cables Lubricating in Accordance with the Lubrication Schedule Page Page Page TROUBLE SHOOTING GUIDE Trouble Shooting Guide Page Page STORAGE Storage Winter Storage Service WIRING DIAGRAM Wiring diagrams WIRING DIAGRAMS TECHNICAL DATA Technical Data TECHNICAL DATA Torque Specifications Page Service Journal Delivery Service After the First 8 Hours 25-Hour Service 50-Hour Service 100-Hour Service 300-Hour Service At Least Once Each Year