English-47
LUBRICATION
4. Belt Adjuster, Mower Deck
Remove the plate (four screws) and lubricate
with a grease gun, one zerk, until grease is
forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
5. Throttle and Choke Cables, Lever
Bearings
Lubricate the cable ends by the carburetor
with the oil can. Move the controls to the end
points and lubricate again.
The throttle cable is also lubricated at the
control when the control console is removed.
8011-45
3
The belt adjuster grease zerk
IMPORTANT INFORMATION
Be spartan and remove excess lubricant so
that is does not come into contact with
belts or belt pulley drive surfaces.
8011-605
Throttle and choke cables by the carburetor