Husqvarna YTH2454 TO REPLACE MOWER DRIVE BELT See Fig, Service And Adjustments, Belt Routing

Models: YTH2454

1 48
Download 48 pages 36.56 Kb
Page 24
Image 24
TO REPLACE MOWER DRIVE BELT (See Fig. 29)

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER DRIVE BELT (See Fig. 29)

MOWER DRIVE BELT REMOVAL

Park tractor on a level surface. Engage parking brake.

Lower attachment lift lever to its lowest position.

Disengage belt tension rod from lock bracket.

CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and release slowly.

Remove screws from R.H. and L.H. mandrel covers and remove covers.

Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

Remove belt from electric clutch pulley, both mandrel pulleys and all idler pulleys.

MOWER DRIVE BELT INSTALLATION

Install belt around both mandrel pulleys and around idler pulleys as shown.

Install belt onto electric clutch pulley.

IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.

Reassemble R.H. and L.H. mandrel covers. Securely tighten all screws.

Engage belt tension rod on locking bracket.

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

Raise attachment lift lever to highest position.

BELT ROUTING

 

L.H. MANDREL

 

COVER

 

LOCKING BRACKET

BELT TENSION

ELECTRIC

ROD (DISENGAGED

POSITION)

CLUTCH

 

PULLEY

R.H. MANDREL

COVER

R.H.

MANDREL

IDLER

PULLEYS

Fig. 29

24

Page 24
Image 24
Husqvarna YTH2454 owner manual TO REPLACE MOWER DRIVE BELT See Fig, Service And Adjustments, Belt Routing