Husqvarna YTH2454 TO REMOVE HOOD AND GRILL ASSEMBLY See Fig, To Adjust Throttle Control Cable

Models: YTH2454

1 48
Download 48 pages 36.56 Kb
Page 27
Image 27
TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 34)

SERVICE AND ADJUSTMENTS

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 34)

Raise hood.

Unsnap headlight wire connector.

Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

02778

FIG. 34

ENGINE

TO ADJUST THROTTLE CONTROL CABLE

The throttle control has been preset at the factory and adjustment should not be necessary. If adjustment is nec- essary, see engine manual.

TO ADJUST CHOKE CONTROL

The choke control has been preset at the factory and ad- justment should not be necessary. If adjustment is neces- sary, see engne manual.

TO ADJUST CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your tractor to an authorized service center for repair and/or adjustment.

27

Page 27
Image 27
Husqvarna YTH2454 TO REMOVE HOOD AND GRILL ASSEMBLY See Fig, To Adjust Throttle Control Cable, To Adjust Choke Control