Husqvarna YTH24V42LS owner manual Service And Adjustments, A M C D C D, F O P Q E H B

SERVICE AND ADJUSTMENTS

A

B

Fig. 21

•ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.

•Repeat on opposite side of tractor.

C

D

Fig. 22

•ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert threaded rod end of link assembly through front hole in tractor suspension bracket (F).

•Install bushing (O) and loosely install nut (P) and jam nut (Q).

•Insert flared ends of link (E) into slots in front mower bracket (H).

•Check Front-To-Back Adjustment in "TO LEVEL MOWER" in this section.

F
O	P
E
	Q
H

Fig. 23

•Install belt onto electric clutch pulley (M).

M

Fig. 24

IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES.

•Raise attachment lift lever to highest position.

•If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual.

See Mower Drive Belt Installation in "TO REPLACE MOWER BLADE DRIVE BELT" in this section of the manual.

A M

C

D

C

D

F O P

Q

E

H

B

Fig. 25

19