PRESENTATION

Lifting Lever for the Mower Deck

The lifting lever is used to place the mower deck in the transport position or one of the 17 different cutting height positions.

The cutting height is set by placing a peg in the hole for the desired cutting height and the peg is then locked on the inside (hidden in the illustration) with the supplied pin.

1.Pull the lever backward to the locked position to engage the transport position. The deck is then raised.

2.Depress the lock handle, counter hold, and move the lifting lever forward toward the peg to engage the set cutting height. The deck is then lowered.

3.The lifting lever can also be used to temporarily adjust the cutting height, such as when passing a minor bump in the lawn.

8011-525

The mower deck’s lifting lever

IMPORTANT INFORMATION

In order to obtain an even cutting height it is important that the air pressure in all four tires is the same (1 bar).

Accessories

For mulching, there is a BioClip attachment available. This is mounted underneath the mower deck and comprises control plates and BioClip blades.

8011-566

BioClip attachment

English-17

Page 19
Image 19
Husqvarna ZTH manual Lifting Lever for the Mower Deck, Accessories