Husqvarna ZTH manual Throttle and Choke Cables, Lever Bearings, Dipstick markings

LUBRICATION

The oil level shall lie between the markings on the dipstick. If the level is approaching the ”ADD” mark, top up the oil to the ”FULL” mark on the dipstick.

Never fill to above the ”FULL” mark.

The oil is topped up through the hole the dipstick sits in.

Use engine oil SAE 30 or SAE 10W-30 or, alternately, 10W/40, class SC–SH

(over 0 °C/+32 °F).

Over +20 °C/+68 °F SAE 40 can be used.

Use engine oil SAE 5W-20, class SC–SH (under 0 °C/+32 °F).

The engine holds 1.5 liters of oil excluding the filter (including filter 1.7 liters).

4.Throttle and Choke Cables, Lever Bearings

Lubricate the cable ends by the carburetor with the oilcan. Move the controls to the end points and lubricate again.

The throttle cable is also lubricated by the control when the control console is removed.

	ADD	FULL
ADD	FULL
		8009-159

The dipstick markings

-20 C	-10 C	0 C	10 C	20 C	30 C	40 C
					SAE40
				SAE30
	SAE10W-30/SAE10W-40
SAE5W-20
-4 F	14 F	32 F	50 F	68 F	86 F	104 F

8009-140

Engine oils

8011-605

Throttle and choke cables by the carburetor

English-36