Husqvarna ZTH manual The mower deck’s anti-scalp rollers shall be evenly adjusted, Running

RUNNING

3.Select the cutting height by placing the peg in one of the holes. Lock the peg on the inside with the pin.

4.Press in the stop handle, counter hold, and carefully move the lifting lever forward from the transport position toward the peg.

IMPORTANT INFORMATION

The mower deck’s anti-scalp rollers shall be evenly adjusted.

8011-561

Cutting height selection

WARNING!

Ensure that no one is near the machine when engaging the mower deck.

5. Engage the mower deck by pulling out
the lever.
6. The machine’s speed and direction are
continuously variable using the two
steering controls. When both controls are
in the neutral position, the machine
stands still.
By moving both controls an equal
amount forward or backward, the
machine moves in a straight line forward
or backward respectively.
In order, for example, to turn right while	8011-510
	Engaging the mower deck
moving forward, move the right control
towards the neutral position. The rotation
of the right wheel is reduced and the
machine turns to the right.

Turning on the spot can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position.

English-22