P/N 0425683F | ® |
2.Unscrew the two #6 Phillips screws that hold the black plug into the side of the door as shown in Figure 4. Remove the plug from the door.
4.Use a flat blade screwdriver as shown in Figure 6 to lift the door retainer over the shoulder screw.
Remove Screws
Figure 4. Removing Screws to Plug
3.Grasp the strain relief just below the cord and pull until the heater terminal plug comes out. See Figure 5. Note that the left end door must be opened more than 90 degrees to access the screws.
Figure 5.
Removing the Heater Terminal Plug
Door Retainer
Figure 6. Removing the Door Retainer
5.Push down the top hinge pin until it clears the top socket using a flat blade screwdriver as shown in Figure 7. With finger, hold the hinge pin in the door to keep it from popping out. Tape may be used to temporarily hold the hinge pin once door is removed.
Top
Hinge
Pin
Figure 7.
Removing the Door from the Top Hinge Pin
4 | HUSSMANN CORPORATION • BRIDGETON, MO |