Innovator Door Installation and | P/N 0425683F |
Service Instruction |
|
|
|
|
|
6.Rock the door out and pull the bottom hinge pin out from the bottom socket.
7.Install the new door in reverse order.
8.Adjust the torque on the new door. If needed, adjust sag.
REPLACING MAGNETIC GASKET
Carefully remove the old gasket from the groove in the back of the door, Figure 9.
REPLACING DOOR HINGE SPRING
The door must be removed before replacing the door hinge spring.
Pull the hinge spring assembly out of the bottom
of the door and replace with a new assembly. See
Figure 8. Note that there are
Figure 9. Removing Door Gasket
The new gasket will be easier to work with if it is at ambient temperature. Begin by lubricating the new gasket with a mild soap and water solution.
Figure 8. Replacing Door Hinge
Spring Assembly
HUSSMANN CORPORATION • BRIDGETON, MO | 5 |