Innovator Door Installation and | P/N 0425683F |
Service Instruction |
|
|
|
|
|
!WARNING
Always disconnect the electrical power at the main disconnect when servicing or replacing any electrical component. This includes, but is not limited to, such items as doors, lights, fans, heaters, and thermostats.
REPLACING DOORS
1.Loosen torque on door before removing the door. Wedge a screwdriver between the bottom of the door and the hinge socket, then lift the door up. This will lift the bottom hinge pin up and out of the bottom hinge socket. Hold the hinge pin with a 1/2 in. (13 mm) open end wrench to keep it from spinning out and stripping the socket. See Figure 3.
Screwdriver
Lift up
Figure 3. Loosening Torque on the Door
HUSSMANN CORPORATION • BRIDGETON, MO | 3 |