hussman P/N 406928 5-4 MAINTENANCE

STEP 9 – Clean inside the merchandiser.

Once interior parts have been removed, collect

loose debris for removal. Do not clog waste

outlet.

STEP 10 – Clean and sanitize according to

local requirements.

STEP 11 – Reassemble in reverse order.

Turn on power, then refrigeration. Make certain

merchandiser has cooled to operating temperature

before restocking.

REMOVING SCRATCHES FROM BUMPER

Most scratches and dings can be removed using

the following procedure.

1. Use steel wool to smooth out the surface area

of the bumper.

2. Clean area.

3. Apply vinyl or car wax and polish surface for

a smooth glossy finish.

5-4 MAINTENANCE

P/N 406928

Contents

Main P/N 406928 iii TTAABBLLEE OOFF CCOONNTTEENNTTSS P/N 406928 1-1 IINNSSTTAALLLLAATTIIOONN Do NOT walk on top of merchandisers 1-2 INSTALLATION P/N 406928 P/N 406928 1-3 Shipping Rider for 8 ft Case Page P/N 406928 2-1 RREEFFRRIIGGEERRAATTIIOONN // EELLEECCTTRRIICCAALL 2-2 REFRIGERATION / ELECTRICAL P/N 406928 Offtime Defrost P/N 406928 2-3 2-4 REFRIGERATION / ELECTRICAL P/N 406928 3-1 DDRRIIPP PPIIPPIINNGG AANNDD SSPPLLAASSHHGGUUAARRDDSS 3-2 DRIP PIPING AND SPLASHGUARDS 2 3 1 1 P/N 406928 3-3 Detail Page DO NOT BLOCK AIR GRILLE. P/N 406928 4-1 SSTTAARRTT UUPP // OOPPEERRAATTIIOONN Page Do Not Use: Do: P/N 406928 5-1 MMAAIINNTTEENNAANNCCEE ALWAYS SHUT POWER OFF DURING CLEANING PROCESS. Page OR 5-4 MAINTENANCE P/N 406928 6-1 SSEERRVVIICCEE 6-2 SERVICE P/N 406928 6-3 IMPORTANT! 6-4 SERVICE P/N 406928 6-5 6-6 SERVICE P/N 406928 6-7 6-8 SERVICE P/N 406928