LEVELING
Merchandisers must be installed level to
ensure proper operation of the refrigeration
system and to ensure proper drainage of
defrost water.
Set a long level (4 ft [1220 mm] or more) on
the upper front panel of the merchandiser.
Use an open-end wrench to turn leg levelers
until the merchandiser is level from end to
end and from front to back. Check all 6 legs
on 8 ft (2438 mm) cases, or 8 legs on 12 ft
(3658 mm) cases.
Note: To avoid removing concrete flooring,
begin lineup leveling from the highest point
of the store floor.
P/N 406928 1-3EEuurroo DDeellii MMeerrcchhaannddiisseerrss
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
Cross-Members
Screws
(each leg)
Sides
Leg
Screws
(two each end
of each
cross-member)
Shipping Rider
for 8 ft Case
MINIMUM
HEIGHT
MAXIMUM
HEIGHT
Adjustable
Leg Leveler
Lower
Raise
Level on
Upper Front
Panel
U