REPLACING ELECTRONIC BALLAST
Lamp Ballast
The lamp ballast are located in the raceway,
behind the back lower panel at the left-hand end
of the merchandiser (facing rear of case). NOTE:
The switch for the lamp is located in this panel.
To gain access:
1. Disconnect the electrical power to the mer-
chandiser.
2. Remove the left lower rear panel.
3. Service or replace ballast as required.
Reassemble items as they were originally
installed.
4. Reconnect the electrical power.
6-4 SERVICEP/N 406928
Ballast Located
Behind This Panel
Always disconnect the electrical power
at the main disconnect when servicing
or replacing any electrical component.
This includes, but is not limited to,
such items as fans, heaters,
thermostats and lights.
WARNING
!
Remove Screws Holding Panel in Place
Light Switch Below