General Instructions, Table of Contents | hussman Q1-DC specification

Q1-DC-0508

General Instructions

Table of Contents
General Instructions	2
Cut and Plan Views	3
Installation	3
Location	3
Uncrating the Stand	3
Tighten Glass Screws	3
Exterior Loading	3
Setting and Joining	3
Leveling	3
Q1-DC Refrigerated Wedges and Standard Cases	4
Plumbing	5
Waste Outlet and P-TRAP	5
Installing Condensate Drain	5
Refrigeration	5
Refrigerant Type	5
Piping	5
Refrigeration Lines	5
Control Settings	5
Access to TEV Valves and Drain Lines	5
Electronic Expansion Valve (Optional)	6
Expansion Valve Adjustment	6
Measuring the Operating Superheat	6
Thermostat Location	6
Electrical	6
Wiring Color Code	6
Electrical Circuit Identification	6
Field Wiring and Serial Plate Amperage	6
Ballast Location	6
Wiring and Serial Plate Amperage	7
ASHRAE Color Code	7
Finishing Touches	7
Bumper Installation Tips	7
Installing Splashguard	7
User Information	7
Stocking	7
Important Steps	8
Case Cleaning	8
Cleaning Glass and Mirrors	8
Non-Glare Glass	9
Plexiglass and Acrylic Care	9
Cleaning	9
Antistatic Coatings	9
Maintenance	10
Replacing Fluorescent Lamps	10
Evaporator Fans	10
Coils	10
Tips and Troubleshooting	10
Glass Replacement and Adjustment Instructions	10
Electrical Wiring Diagrams	11
Wiring Diagrams	12
Appendices	32
Appendix A. - Temperature Guidelines - Refrigerated	32
Appendix B. - Application Recommendations - Refrigerated...	32
Appendix C. - Field Recommendations - Refrigerated	32
Appendix D. - Recommendations to User - Refrigerated	33

This Booklet Contains Information on:

Q1-DC refrigerated, service deli merchandiser.

Shipping Damage

All equipment should be thoroughly examined for shipping damage before and during unloading.

This equipment has been carefully inspected at our factory and the carrier has assumed responsibility for safe arrival. If damaged, either apparent or concealed, claim must be made to the carrier.

Apparent Loss or Damage

If there is an obvious loss or damage, it must be noted on the freight bill or express receipt and signed by the carrier’s agent; otherwise, carrier may refuse claim. The carrier will supply necessary claim forms.

Concealed Loss or Damage

When loss or damage is not apparent until after equipment is uncrated, a claim for concealed damage is made. Make request in writing to carrier for inspection within 15 days, and retain all packaging. The carrier will supply inspection report and required claim forms.

Shortages

Check your shipment for any possible shortages of material. If a shortage should exist and is found to be the responsibility of Hussmann Chino, notify Hussmann Chino. If such a shortage involves the carrier, notify the carrier immediately, and request an inspection. Hussmann Chino will acknowledge shortages within ten days from receipt of equipment.

Hussmann Chino Product Control

The serial number and shipping date of all equipment has been recorded in Hussmann’s files for warranty and replacement part purposes. All correspondence pertaining to warranty or parts ordering must include the serial number of each piece of equipment involved, in order to provide the customer with the correct parts.

Keep this booklet with the case at all times for future reference.