![](/images/new-backgrounds/1054467/544677x1.webp)
Electrical
WIRING COLOR CODE
L1 | BLACK |
L2 | ORANGE |
L3 | BLUE |
NEUTRAL | WHITE |
|
|
NOTE: High Leg Connection
Orange Only
ELECTRICAL CIRCUIT IDENTIFICATION
Standard lighting for all models will be fluorescent lamps located within the case at the top.
The switch controlling the lights and heaters are located within an access panel on the side of the case.
Field wiring from the where??
Most component amperes are correctly listed in the “Case Specs” section, but due to parts availability they may vary slightly. Always check the serial plate for the actual loads.
BALLAST LOCATION
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ballast |
|
|
|
|
|
| Ballast |
| ||||||
(one for each light) |
|
|
|
|
|
|
|
|
|
|
Control Panel
BEFORE SERVICING
ALWAYS DISCONNECT ELECTRICAL POWER AT THE MAIN DISCONNECT WHEN SERVICING OR REPLACING ANY ELECTRICAL COMPONENT.
This includes (but not limited to) Fans, Heat-
ers, Thermostats, and Lights.
FIELD WIRING & SERIAL PLATE AMPERAGE
Field Wiring must be sized for component amperes printed on the serial plate.Actual ampere draw may be less than specified. Field wiring from the
RHR-HEX 6' & (4')
Ballast | Ballast |
(one for each light)
Control
Panel
Ballast for shelves
RHR2-HEX 6' & (4')
Self-Service Hot
Scale = 1/2"
4