VGM,
hot water.
2.Rinse with hot water, but do not flood.
3.Apply the sanitizing solution according to HussmannÕs directions.
4.Rinse thoroughly.
5.Dry completely before resuming operation.
CLEANING GLASS & MIRRORS
Only use a soft cloth and mild glass cleaner for cleaning any glass or mirrored components. Be sure to rinse and/ or dry completely. Never use hot water on cold glass surfaces! It may shatter and cause serious injury! Allow glass surfaces to warm first.
CLEANING
PRECAUTIONS
WHEN CLEANING:
Never Use a Cleaning or Sanitizing Solution that has an OIL BASE (these will dissolve the butyl sealants) or AMMONIA BASE (this will corrode the copper components of the case)
TO PRESERVE THE ATTRACTIVE FINISH:
Do Use Water and a Mild Detergent for the Exterior Only!
Do Not Use Abrasives or Steel Wool Scouring Pads (these will mar the finish)
PLEXIGLASS & ACRYLIC CARE
Improper cleaning not only accelerates the cleaning cycle but also degrades the quality of this surface. Normal daily buffing motions can generated static cling attracting dust to the surface. Incorrect cleaning agents or cleaning cloths can cause micro scratching of the surface, causing the plastic to haze over time.
CLEANING
Hussmann recommends using a clean damp chamois, or a paper towel marked as dust and abrasive free with
210¨ Plastic Cleaner and Polish available by calling Sumner Labs at
ANTISTATIC COATINGS
The 210¨ has proven to be very effective in not only cleaning and polishing the Plexiglass surface, but also providing
NON - GLARE GLASS
The high optical clarity of this glass is possible due to special coatings on the glass surface itself. To preserve this coating and the optical clarity, keep th glass clean.
Windex¨ or Glass Plus¨ are the only soluitons recom- mended to be used to clean the
In addition to cleaning the glass with the recommended product, there are precautions that should be taken when working and cleaning the inside of the case.
¥When cleaning the inside of the cases, we recommend tha tthe glass be fully opened and covered to prevent to prevent solutions from plasihgn onto the glass and ruining the coating on the inside.
1 0
