VGM,
Maintenance (cont.)
2.Increase the height to 12", and raise and lower the glass 6 more times.
3.Finally, raise the glass to it's full extension.This should release any settled lubricant in the cylinders, and prevent any stress on the front glass. (1)(3)
GLASS REPLACEMENT & RIGHT – LEFT ADJUSTMENT
1. Open glass | 2. Back out |
panel. | all the set screws |
Relieve the | along the top |
tension on | edge of the glass |
the hinge. | panel |
| (3mm set screw) |
PVC
Back
of Case
Inside
of Case
3.Use tip of screwdriver to gently tap loose wedge the entire length of the panel
4.Slide glass panel in desired direction or remove panel
FOR PROMPT SERVICE
When Contacting the Factory regarding problems, Be sure to have the Case MODEL and SERIAL NUMBER Handy.
This Information is on a plate located on the case itself.
1 2
