GENERAL INFORMATION
This manual applies to the following equipment: 4200 Hustler tractor, number 924621
4300 Hustler tractor, number 924647
4400 Hustler tractor, number 924639
4500 Hustler tractor, number 924654
4200 Hustler tractor, BTO, number 924704
4300 Hustler tractor, BTO, number 924712
4400 Hustler tractor, BTO, number 924720
4420 Hustler tractor, BTO, number 925024
4500 Hustler tractor, BTO, number 924738
4600 Hustler tractor, BTO, number 925008
To the new owner
The purpose of this manual is to assist owners and operators in maintaining and operating the Hustler tractor. Please read it carefully; information and instructions furnished can help you achieve years of dependable performance.
This model meets ANSI B71.4 safety specifications for commercial turf care equipment.
A separate Engine Manual is included with your owner’s packet which contains additional engine information that will not be repeated in this manual. You are urged to read it before attempting any operation or repair of the engine.
The Quick Reference Decal located on your tractor is designed to give the operator brief information needed in the daily operation of the machine. This decal is not intended to be used in place of this manual but instead is to be used as an extension of this manual. This decal should be kept legible at all times and replaced if it becomes damaged. It is the owner’s responsibility to make certain that the operator reads and understands this manual and the Quick Reference Decal before operating this machine.
Using this manual
General operation, adjustment and maintenance guidance is outlined for both the experienced and novice Hustler user. Operating conditions vary considerably and cannot all be addressed individually. Through experience, however, operators should find no difficulty in developing good operating skills suitable to most conditions.
Directions used in this manual, for example RIGHT or LEFT, refer to directions when seated on tractor facing forward, unless otherwise stated.
Photographs and illustrations used were current at the time of printing, but subsequent production changes may cause your machine to vary slightly in detail. Hustler Turf Equipment reserves the right to redesign and change the machine as deemed necessary, without notification. If a change has been made to your machine which is not reflected in this owner’s manual, or the parts manual, see your Hustler dealer for current information and parts.
Warranty registration
The Delivery and Warranty Registration card must be completed and signed to validate your warranty protection. As the new equipment owner, you are expected to see that the card is completed and forwarded to Hustler Turf Equipment at time of delivery.
Be sure to register the tractor plus each attachment that displays a model and serial identification number plate; i.e. mower decks, snow blower, front blade, etc.
IMPORTANT: Any unauthorized modification, alteration, or use of
Model and serial number
Tractor model and serial numbers are found on the serial identification plate, located on the panel directly below and to the right of the operator’s seat.
These numbers are required on the Warranty Registration card. They will also assure you of the correct service parts when replacement becomes necessary.
Parts and service
Use original Hustler equipment replacement parts only. These parts are available through your local Hustler equipment dealer. To obtain prompt, efficient service, always provide the following information when ordering parts:
1.Correct part description and number, as given in the parts manual supplied with your owner’s packet.
2.Correct model number.
3.Correct serial number.
All warranty repair and service must be handled through an authorized Hustler dealer. Arrangements should be made through your local service center.
For location of nearest dealer, or should you need further assistance, contact:
Customer Service Department Hustler Turf Equipment P.O. Box 7000
Hesston, KS 67062 Telephone (316)
728444 Rev. 11/02 |
