Hustler Turf 928168 Engine Pulley, Warner Clutch, Pulley BDP-21, KEY for BDP21L, Pump Idler ARM

Pump Belt and Pulleys Installation

ITEM	SERVICE	MFG.	QTY	DESCRIPTION
NO.	PART NO.	PART NO.
1	601462	601462	1	ENGINE PULLEY
2	212076	212076	1	KEY 1/4 SQ X 1.50 LONG
3	601311	601311	1	WARNER CLUTCH
4	783829	783829	1	FW .460 X 1.750 X .250 ZNYC
5	785659	785659	1	CS .437-20 X 2.50 HX G5 ZNYC
6	083196	083196	4	SS .312-18X .750 SQ-HD ZN
7	601461	601461	2	PULLEY BDP-21
8	783712	783712	2	KEY FOR BDP21L
9	791251	791251	1	CLUTCH PIGTAIL HARNESS WITH DIODE
10	008193	008193	2	NT .500-13 HX G5 ZNYC
11	767962	767962	4	FW .531 X 1.063 X .090 SAE HD ZN
12	016527	016527	2	CS .500-13 X 1.00 HX G5 ZNYC
13	366765	366765	1	CLUTCH ANCHOR ANGLE
14	784918	784918	2	RUBBER BUMPER
15	349761	349761	1	PUMP IDLER ARM
16	015495	015495	1	STRAIGHT GREASE FITTING
17	025296	025296	1	FW .760 X 1.625 X .08 ZN
18	061101	061101	1	NT .750-10 HX NL ZN
19	781856	781856	1	IDLER PULLEY
20	028118	028118	1	FW .62 X 1.00 X.134 ZN
21	781872	781872	1	CS .625-11 X 1.50 HX G5 ZN
22	601016	601016	1	IDLER SPRING
23	601463	601463	1	A-SEC PUMP IDLER BELT
24	036236	036236	1	CS .312-18 X 1.00 HX G5 ZNYC
25	768523	768523	2	FW .343 X .687 X .051/.080 HD ZNYC
26	034272	034272	1	NT .312-18 HX G5 ZNYC
27	797654	797654	1	FW 1.156X1.750X.250 ZY

NOTES:

1.Torque to 45-48 ft-lbs.

2.Torque to 12-15 ft-lbs.

3.Apply grease at zerk (see owners manual).

4.Do not torque Item 18 (NT .750-10 HX NL ZN), Item 15 (349761 Pump Idler Arm) should pivot freely.

5.Electric clutch burnishing procedure: After installing a new clutch it is important to burnish the clutch to insure maximum deck clutch life. In an open area with no bystanders set the engine speed to half throttle. Cycle the deck clutch on for 15 seconds, and then off for 15 seconds. Repeat this operation 10 times, it will require about 5 minutes to complete.

108604 10/08 4-13