Hypertec PC Card 10/100 TX manual DOS Installation, Software Included

3.From the Program Manager, select File Menu. (For Windows 95, select the start menu)

4.Select Run…

5.Type A:\SETUP and select OK.

6.Follow the Help utility's on-screen instructions for the setup process.

DOS Installation

Look at the README file.

Software Included

￿ODI workstation drivers for Novell NetWare, NetWare Lite, Novell DOS 7 and OS2

￿NDIS 2.0.1 driver for Microsoft LAN Manager, Windows for Workgroups, Artisoft LANtastic, Banyan Vines, OS2 and others.

￿NDIS 3 for Windows 98, Windows 95 and Windows NT

￿Wizard utility for installation, self-test and diagnostics

Disconnecting the HyperNet PC Card 10/100 TX

To remove the card from the computer PCMCIA slot, activate the release switch located on your computer. Alternatively, you may simply disconnect the media coupler, and leave the HyperNet PC Card in place in the slot ready for you to use it next time you need it.

To remove the media coupler from the card, gently squeeze the plastic clip depressors located on the coupler and separate it from the card.

Never disconnect the HyperNet PC Card by pulling on the cable.

If at any time during installation you experience difficulties, please contact Hypertec Technical Support on +44 1488 686844 (01488 686844 in the UK).