bs EQUALIZER (EQ) BUTTON
The EQ button applies preset sound effects to the unit’s audio output signal.The EQ button, when pressed, will activate one of the following operating modes ( CLASSICS, POP M, ROCK M, DSP OFF or FLAT). If the Equalizer function is active, as displayed on the panel, and the bass and/or treble level is set, the Equalizer function reverts to the FLAT setting. On the other hand, if the Equalizer function is activated, the bass/ treble setting(s) are ignored. Conversely, when the Equalizer function is not active, the unit returns
to the user set bass and treble levels.
bt
When this button is pressed during radio operation, each station in the current band will be scanned in the upward direction; each displayed station will flash for 5 seconds before moving on to the next station. If the local mode is active, only the stronger, nearby stations in the current band will be scanned. When the desired station appears, press the SCN button again to remain on that frequency.
bu LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time and activated functions, including a combination audio level/disc
indicator in the form of dual disc icons ( 
)
with circular bar graphs depicting the the audio signal. In addition, the display also contains a receive signal indicator which depicts the relative strength of the incoming broadcast frequency.
NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they may take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD
cl DISC SLOT
Gently insert the disc into the slot (label surface facing up) until the
5 seconds, the center of the disc ( 
)
indication illuminates and becomes animated, and the track number and elapsed time appear on the display panel.
CAUTION: This unit is designed for play of standard 5" (12cm) compact discs ONLY. Do not attempt to use 3" (8cm)
cm TRACK SELECT ( 
/ 
)
The Track Select function of the Tune/Seek/ Track buttons is used to quickly access the beginning of a particular track when a disc is in play. Each time the Forward Track Select (
) button is pressed, the next higher track number will be selected as shown on the display panel. Similarly, each time the Backward Track Select (
) is pressed, the next lower track number will be selected as shown on the display panel.
cn CUE/REVIEW FUNCTIONS ( 
/ 
)
) button to advance rapidly in the forward direction (the advancing disc playing time will be shown on the display panel, except for discs formatted with MP3 audio), or the Review (
) button to advance rapidly in the backward direction (the decreasing disc playing time will be shown on the display panel, except for discs formatted with MP3 audio).
OPERATING INSTRUCTIONS
9
