Hyundai ACD-91 Operating Instructions, ON-OFF Power Button, Volume Level Control, Bass Control

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

						32, 33
34	19		20	BEHIND PANEL				30	14		28
											31
3											29
			CAR CD MP3 PLAYER RECEIVER					SUB			11
4
											12
5
											21
6
											22
7
											37
											38
											15
2	1	13	27	23	24	25	26	8, 10	18	17	9
			35	39	40	41	36
					16

6

1ON-OFF POWER BUTTON

Press this button to turn the unit on and off when the ignition switch is on. When the unit is off, the Liquid Crystal Display (LCD) panel will normally display the time-of-day. If the radio is off when the ignition switch is turned off, the POWER button must be pressed to turn on the radio after the ignition switch is turned on. If the ignition switch is turned off while the radio is on, the radio will display the time of day, and will come on automatically when the ignition switch is again turned on.

2VOLUME LEVEL CONTROL

To increase the volume level, rotate the PUSH SELECT-VOL control clockwise (CW). The volume will increase and the level will be shown on the display panel from a minimum of 00 to a maximum of 100. To decrease the volume level, rotate the PUSH SELECT-VOL control counterclockwise (CCW). The vol- ume will decrease as shown on the display panel. This control also includes the inte- gral Select button 3 for adjustment of the

bass, treble, balance and fader levels as de- scribed in 4, 5, 6, and 7.

3PUSH SELECT BUTTON (SEL)

This button is used to select the audio function (bass, treble, balance, or fade) to be adjusted using the Volume Level control 2. Pressing the Select button once will set the unit for volume adjustment (VOL will appear on the display panel). Pressing the button additional times will select bass adjustment (BAS on display), treble (TRB), balance (BAL), or fader (FAD). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

NOTE: If the BAS or TRB functions are set while the Equalizer function (PEQ) is active, the Equalizer function will automatically revert to the FLAT setting.

4BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the PUSH SELECT button 3 so the BAS indication appears on the display panel. Within 5 seconds of choosing the Bass