OWNER’S MANUAL
VCR Setup
•Connect an antenna or a RCA Cable between the ANTENNA jack on the rear of the TV and the ANTENNA OUT jack on the VCR.
•Connect the RCA Jack of the VCR to the RCA AV1 or AV2 of the set.
•Press the PLAY button on the VCR.
•When connecting the
•Connect the
•Connect the audio cable from the
•Select the
•Press the PLAY button on the VCR. The VCR playback picture appears on the screen
Connection of external equipment
T i p s
•To avoid picture noise (interference), leave an adequate distance (20 inches or more) between the VCR and TV.
To watch VCR
1 | Press TV/AV button on the remote control and select AV1 or AV2. (When connecting |
with the |
2 | Insert a video tape into the VCR and press the PLAY button on the VCR. See VCR |
owner’s manual. |