IBM 02L1333 Configuring the ATM Module, Access the Local Management Screens

Models: 02L1333

1 6
Download 6 pages 5.05 Kb
Page 2
Image 2
Configuring the ATM Module

28271 NWAYS ETHERNET LAN SWITCH ATM OC-3C MODULE QUICK REFERENCE GUIDE

Configuring the ATM Module

1Access the Local Management Screens

Refer to “Accessing Management Features” in the ATM Module User’s guide for instructions.

2Ensure that the ATM Module and ATM Switch use compatible settings:

a From the Main Menu, select the ATM Configura- tion option. The ATM Module Configuration screen is displayed. An example of the screen is shown in Figure 1.

Figure 1 ATM Module Configuration Screen

bEnsure that the signalling mode used by the ATM Module matches the signalling mode used on the ATM Switch, either version 3.0 or 3.1.

cEnsure that the ATM Module and the ATM Switch are using the same physical standard, either SONET STS-3c or SDH STM-1.

dEnsure that the ATM Module and ATM Switch are using the same ILMI VCC. The standard ILMI VCC is VPI = 0, VCI=16.

eIf you do not need to make any changes, select the CANCEL button. Select the OK button to apply the changes and automatically reset the device.

3Ensure that the Default VLAN is operational

a From the Main Menu, select the Switch Manage- ment option. The Switch Management screen is displayed. An example of the screen is shown in Figure 2.

Figure 2 Switch Management Screen

bIn the Management Level field ensure that the Port option is selected. You can use the spacebar to toggle between the options.

Page 2
Image 2
IBM 02L1333 Configuring the ATM Module, Access the Local Management Screens, Ensure that the Default VLAN is operational