Lenovo MT 1867, MT 2506, MT 1866, MT 1869 manual continued, 56MT1866/1867/1869

Symptom-to-FRU index

Symptom or error	FRU or action, in sequence
0182	1. Run BIOS Setup Utility.
Bad CRC2. Enter BIOS Setup	Press F9, and Enter to
and load Setup	load the default setting.
defaults.—Checksum of the	Then save current setting
CRS2 setting in the EEPROM
	by pressing F10.
is not correct.
	2. System board.
0185	1. Run BIOS Setup Utility.
Bad startup sequence settings.	Press F9, and Enter to
Enter BIOS Setup and load	load the default setting.
Setup defaults.	Then save current setting
	by pressing F10.
0187	System board.
EAIA data access
error—EEPROM access (read
or write) is failed.
0188	System board.
Invalid RFID Serialization	Replace planar. Box serial
Information Area or Bad	number needs to be reinstalled.
CRC2—EEPROM checksum is
not correct (block #0,1).
EEPROM CRC2 is not correct
(block #6).
0189	System board.
Invalid RFID configuration	Replace planar. UUID needs to
information area—EEPROM	be reinstalled.
checksum is not correct (block
#4,5).
0190	1. Charge the battery pack.
Critical low-battery error	2. Battery pack.
0191	1. Run BIOS Setup Utility,
System Security—Invalid	and then save current
Remote Change requested.	setting by pressing F10.
	2. System board.
0192	System board.
System Security—IBM
Embedded Security hardware
tamper detected.

(continued)

56MT1866/1867/1869