Lenovo MT 2506, MT 1867, MT 1866, MT 1869 manual Symptom or error

	Symptom-to-FRU index
Symptom or error	FRU or action, in sequence
1810	1. If the Access IBM
Hard disk partition layout error	Predesktop Area has been
	previously disabled, then
	go the the BIOS Setup
	Utility by pressing F1 to
	open the BIOS Setup
	Utility. Select
	Security->Predesktop
	Area-> Access IBM
	Predesktop Area. Set this
	item to Disabled. Save
	and exit.
	2. If the Access IBM
	Predesktop Area has not
	been previously disabled,
	press Enter to load Access
	IBM Predesktop Area. Then
	run RECOVER TO
	FACTORY CONTENTS in
	Access IBM Predesktop
	Area.
	3. If item 2 failed, press F3 in
	welcome screen in
	RECOVER TO FACTORY
	CONTENTS. Run FDISK,
	and then delete all
	partitions. Run RECOVER
	TO FACTORY CONTENTS
	in Access IBM Predesktop
	Area again.
	4. If item 3 failed, select
	CD-ROM boot in Startup in
	Access IBM Predesktop
	Area. Boot from Recovery
	CD and perform full
	recovery from it.
	5. If item 4 failed, replace the
	hard disk drive.
2000	1. Undock docking station or
Hard Drive Active Protection	port replicator if it is
sensor diagnostics failed.	attached to the ThinkPad
Press <Esc> to continue.
	computer, and place the
Press <F1> to enter SETUP
	computer on a horizontal
	surface. Do not apply any
	physical shock to the
	computer.
	2. Run Diagnostics –>Other
	Devices –>HDD Active
	Protection Test.

ThinkPad X41 Tablet 61