IBM 2785+01 manual Managed Ipds Dialog MID, AFP/IPDS Sbcs Resident Font Support

Models: 2785+01

1 47
Download 47 pages 39.74 Kb
Page 17
Image 17

Family 2785+01 IBM Infoprint 2085

AFP/IPDS dialog management (MID)

Enhanced N-Up and power positioning

Finishing support for hole punching

Nested staple and punch finishing operations

Define Forms (name, size, duplex, orientation):

Page Orientation (edge/side sensitivity)

Adjust Print (simplex/duplex/(normal/tumble))

Media selection by object ID (supported by PSF Version 3 for OS/390 and PPFA)

Dutch KIX postal bar code

Australia Post bar code

Japan Postal bar code support.

Two-dimensional bar codes:

Maxicode

PDF417

Printer identification by name.

Outline font, 240 pel raster fonts and font resource capture (hard disk).

Resolution independent raster font support.

Double Byte Character Set (DBCS) font support (resident and download).

Partial Arc drawing order support.

Box drawing order support.

In addition to the AFP/IPDS enhancements, a Hard Disk Drive (HDD) is provided with preloaded Double Byte Character Set (DBCS) Outline Font Resources. This is important for applications that use double byte characters.

Managed IPDS Dialog (MID)

When some printers connected to an IPDS host end a session, the job resource containing information such as page segment and overlays are discarded. If these resources are required by subsequent IPDS jobs from the same host system, then they must be downloaded again. When a new session is established using the MID function, the host system can release the printer to print other jobs, such as PCL or PostScript without immediately discarding the IPDS rsources. The IPDS dialog may be resumed at a later time.

The IPDS resources are only discarded if a new IPDS connection and dialog is established with a different host system. If the IPDS resources are still available when the original host dialog is resumed, then they do not have to be retransmitted. This can save a significant amount of time. Host system support for MID is already available with MVS, iSeries and AIX systems.

AFP/IPDS SBCS Resident Font Support

Printer resident fonts are supported using outline font technology. Under native mode, all printer-resident AFP/IPDS fonts are accessible to PSF.

http://gsmserv.boulder.ibm.com/cd/usmhw/M2785$01.htm (17 of 47)5/25/2005 7:01:07 AM

Page 17
Image 17
IBM 2785+01 manual Managed Ipds Dialog MID, AFP/IPDS Sbcs Resident Font Support