IBM 3770 manual Demo User’s Guide, RENAME filename1 filename2, Rename filename1 to filename2

	Demo User’s Guide
Command Syntax	Description
RCV [/t=x /m=x]	Wait to receive a single transmission from
[/PTR[n] /PUN[n] /EXCH[n]]	the host.
	/t=x - Time-out after x seconds.
	/m=x - Time-out after x minutes.
	/PTR[n], /PUN[n], /EXCH[n] - Receive only
	printer, punch or exchange files on
	subaddress n.
RCV_FC /d /i	/d - Decode format control characters during
	receive.
	/i - Ignore format control characters during
	receive.
RCV_IRS /c /s /i	/c - Convert IRS characters to CR-LFs
	during receive.
	/s - Strip (remove) IRS characters during
	receive.
	/i - Ignore IRS characters during receive.

RCV_PAD /on /off

RCVM [/t=x /m=x]

[/PTR[n] /PUN[n] /EXCH[n]]

RDRRL xxx

RENAME filename1 filename2

SEND [[b] [j] [p]]file [+[[b] [j] [p]]file...] [&[[b] [j] [p]]file...] [[/p /j] /b]

Turn record padding on or off during receive.

Wait to receive at least 1 transmission from the host.

/t=x - Time-out after x seconds. /m=x - Time-out after x minutes.

/PTR[n], /PUN[n], /EXCH[n] - Receive only printer, punch or exchange files on subaddress n.

Set reader record length.

Rename filename1 to filename2.

Send single or multiple files.

+- Send files as multiple files. & - Send files as one file.

/p, [p] - Pad each record with spaces. /b, [b] - Transmit in binary mode.

/j, [j] - Scan for include records.

SEND_IRS /c /s /i	/c - Convert CR-LFs to IRS characters
	during send.
	/s - Strip (remove) CR-LFs during send.
	/i - Ignore CR-LFs during send.
SEND_PAD /on /off	Turn record padding on or off during send.
SIGNAL [msg] [/t=x] [/a]	Write to a pipe.
	/t - Time-out after x seconds.
	/a - Do not wait for reply.

17