Chapter 4. Tape Drive Speci®cations
This section includes the following speci®cations and requirements:
vPhysical speci®cations
vPower requirements
vDrive performance
vEnvironmental requirements
vTape cartridge speci®cations and capacities
vRegulatory compliance
Physical Speci®cations
The physical speci®cations1 are of both the EIDE and SCSI tape drives are listed in the following tables.
Physical Speci®cations
Type Drive | Internal Drive | External Drive |
Height | 25 mm (1.0 in.) | 51 mm (2.0 in.) |
|
|
|
Width | 102 mm (4.0 in.) | 155 mm (6.1 in.) |
|
|
|
Length | 163 mm (6.4 in.) | 234 mm (9.2 in.) |
|
|
|
Weight | 0.5 kg (1.0 lb.) | 1.4 kg (3.0 lb.) |
Power Requirements
The following table lists the power speci®cations by voltage level for the tape drive. The power speci®cations are measured at the
Power Speci®cations
Voltage | +12 V dc | +5 V dc |
Voltage tolerance | + or −10% | + or −5% |
|
|
|
Operational current | 2.0 amps | 1.0 amps |
|
|
|
Standby current | 0.2 amps | 0.6 amps |
|
|
|
Peak | 2.2 amps max | Ð |
|
|
|
Power Sequence | None | None |
|
|
|
Ripple (peak to peak) | Ü100 mV | Ü100 mV |
|
|
|
Power user (nominal) | < 15 watts (excluding surge) | < 15 watts (excluding surge) |
1.
© Copyright IBM Corp. 1998 | 19 |