SurePOS 500
Prevents messages prompting the user to touch the screen to enter CMOS Setup, unless an error occurs.
Default: Disabled
Options:
•Disabled
•Enabled
No Setup Touch Entry
If enabled, prevents entering CMOS Setup using the touch screen. A keyboard can still be used to enter CMOS Setup.
Default: Disabled
Options:
•Disabled
•Enabled
Boot Up NumLock Status
Selects the
Default: On
Options:
•Off
•On
Security Option
Select whether the password is required every time the system boots or only when entering CMOS Setup.
Select “Setup” to require a password before entering the CMOS Setup Utility. Select “System” to require a password before entering CMOS setup or before booting from one of the selected boot devices.
Use the “Set Password” option on the main menu to set the password. If the password is blank, this option has no affect.
Default: Setup
Options:
•Setup
•System
APIC Mode
This item is for information only and cannot be configured. It shows whether the Advanced Programmable Interrupt Controller is enabled. Some operating systems will utilize the APIC.
HDD S.M.A.R.T. Capability
Select "Enabled" to allow detecting and reporting of some hard disk errors during the POST (Power On Self Test). The BIOS does not detect errors; it only shows errors detected and reported by the hard disk.
Default: Enabled
Options:
•Disabled
•Enabled
Page 48 of 63
