|
|
|
|
|
| P/N: 55P5776 |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| ||||
| The wrong display mode is | Cause 1: The converter box is not connected to the proper | ||||
| displayed. |
|
| connector of the graphics card. | ||
|
|
|
|
|
| Action 1: Connect the converter box to the connector supporting |
|
|
|
|
|
| DVI Dual Link output, referring to the instructions in Chapter 2. |
|
|
|
|
|
|
|
|
|
|
|
|
| Cause 2: The monitor's EDID setting is incorrect. |
|
|
|
|
|
| Action 2: Set the correct value for your graphics card, referring |
|
|
|
|
|
| to the T221 |
|
|
|
|
|
| after making any changes. |
|
|
|
|
|
|
|
|
|
|
|
|
| Cause 3: You are using an unsupported graphics card, or the |
|
|
|
|
|
| device driver is downlevel. |
|
|
|
|
|
| Action 3: Check that the graphics card is a supported type and |
|
|
|
|
|
| that the latest level device drivers are being used (see the T221 |
|
|
|
|
|
| |
|
|
|
|
|
| on how to access the web support page). |
|
|
|
|
|
|
|
|
|
|
|
|
| Cause 4: The graphics card setting is incorrect. |
|
|
|
|
|
| Action 4: Some graphics cards may require the video output |
|
|
|
|
|
| setting changed, by using a software program associated with the |
|
|
|
|
|
| graphics card. For the detail, refer to the user ’s manual for the |
|
|
|
|
|
| graphics card. |
|
|
|
| |||
| The | Color Management Utility | Cause 1: The USB cable is connected to the connector B of the | |||
| or | the | Firmware | Update | monitor. | |
| Utility does not work. |
| Action 1: Disconnect the USB cable, and then connect the USB | |||
|
|
|
|
|
| cable to the converter box that is connected to the connector A of |
|
|
|
|
|
| the monitor. |
|
|
|
|
|
|
|
14