P/N: 55P5776
Converter signal cable (07N2229)
Cable hook
Cable clamp
Fig. 7 Connection of the converter signal cable and the monitor
Connect the other end (marked "3") of the converter signal cable (07N2229) to the converter box.
Fig. 8 Connection of the converter signal cable and the converter box
Connect the dual-link signal cable (55P5729) to the converter box.
It is only necessary to connect the USB cable (55P5728) to the converter box if you wish to use the monitor's Color Management Utility or Firmware Update Utility. In this case, the program(s) for either or both of those utilities must be installed prior to connecting the USB cable.
Important:
Do not connect the USB cable unless you are using the Color Management Utility or Firmware Update Utility.
Note:
The video input and video output are Safety Extra Low Voltage (SELV) circuits.
9
