IBM 600 manual RT/CMOS Smapi

RT/CMOS	(continued)				SMAPI	(continued)
real-time clock bytes(continued)					set hibernation timer B-44
status		register	B	(hex	set system resume timer B-50
00B)		2-22			slave micro control unit B-17
status		register	C	(hex	system identification B-12
00C)		2-23			system information B-12
status		register	D	(hex	system sensor B-18
00D)		2-23			timer control B-31
					UltraBay B-16
S					video B-19
					Sound	Blaster	system settings 3-5,
scan codes 2-4					3-7
selectable		drive-startup			speaker data enable 2-31
sequence		2-32			specifications		1-7, 3-9

sequencing, output	voltage 1-11 acoustical		readings 1-9
serial port 1-4		air temperature 1-8
shutdown status byte, RT/CMOS		DMA controller 1-7
RAM configuration	2-24	electrical	1-8

size, specifications 1-8		electromagnetic
SMAPI		compatibility		1-8
assembler sample B-8		heat output 1-8
BIOS call B-62		humidity	1-8
C language sample B-9		maximum altitude 1-8
calling convention B-6		microprocessor		1-7
configuration	B-22	PC Card 3-9
display device B-14, B-22		refresh rate 1-7
display device, set B-24		size 1-8
docking station	B-15	weight	1-8

event bit definition B-34	standards, PCMCIA 3-9
function declaration B-57	status register A (hex 00A) 2-21
function description B-12	status	register	B	(hex	00B)	2-22
header image B-4	status	register	C	(hex	00C)	2-23

hotkey sticky/lock, set B-28status register D (hex 00D) 2-23

installation check B-58	supervisor password 2-31
parameter structure B-6	switch to real 2-29
pointing device, set B-26	system board

power management B-29		devices	1-3
processor (CPU) B-13		CMOS RAM subsystem 1-3
pseudo code B-10		diskette		drive	controller 1-4
refresh rate B-20		DMA controller 1-3
request	system hibernation B-52 EEPROM		subsystem		1-3
request system off B-52		expansion bus adapter 1-4
request system standby B-51		interrupt controller 1-4
request system suspend B-51		keyboard/auxiliary device
return	codes B-11	controller		1-4
		microprocessor			1-3

X-4