IBM 73P4518 manual Backing up a CD, Problem solving, You cannot create a multi session disc

Models: 73P4518

1 74
Download 74 pages 16.32 Kb
Page 39
Image 39
Backing up a CD

Backing up a CD

To copy a commercial CD you must own the copyright or obtain permission from the copyright owner. If you do not own the copyright or do not obtain permission from the copyright owner, you might be violating copyright law and might be subject to payment of damages or other remedies. For more information on copyright law, consult your legal advisor.

Problem solving

Computer problems can be caused by hardware, software, or user error. The information in this section might be useful to help you solve problems or to gather helpful information you can pass on to a service technician. You might also need to refer to your computer, operating-system, or sound-adapter publications.

Review the following list for any problem descriptions that might fit your situation.

You cannot create a multi session disc.

Be sure that there is enough space left on the disc for another session. Writing a session requires lead-in and lead-out space (about 15 MB) in addition to the data that is recorded.

You cannot successfully write to a CD-R or CD-RW disc.

Take the following actions:

1.Verify that the process is not being interrupted by a screen saver, an antivirus program, an Internet or e-mail program, or other software. Disable the functions that might interrupt the write operation.

2.Verify that the hard disk has been defragmented.

3.Consult the hard disk drive manufacturer or vendor if an older hard disk drive is conducting a thermal recalibration during a write operation.

4.Replace the disc if it is bad or scratched.

5.Disable the Windows Auto Insert Notify function on your CD-ROM and CD-RW drives.

You cannot eject a disc.

Take the following actions after ensuring that the drive is not in the process of writing to a disc:

1.Eject the disc through software.

2.Use the Eject button.

3.Turn off the computer. Wait 45 seconds; then turn on the computer and try using the Eject button again.

4.If other methods do not work, use the emergency eject lever. For more information, see Chapter 4, “Preparing to use the Combo Drive,” on page 4-1.

You cannot read from the CD disc after successfully writing to it.

Take the following actions:

Chapter 7. Using the Combo Drive 7-7

Page 39
Image 39
IBM 73P4518 manual Backing up a CD, Problem solving, You cannot create a multi session disc, You cannot eject a disc