Running All Selected Modules
To run all selected test modules:
1. Use the down arrow key (↓) to move the cursor to the
last choice, Run All Selected Modules.
2. Press Enter.
Note: A “DIAMOND” appears next to your selection.
Changing Selected Tests in Test Groups
To change selected tests in a Test Group:
1. In the Module Tests Menu, use the up and down
arrow keys (↑ and ↓) to move the cursor to your
selection.
2. Scroll to the test you want to select or deselect.
3. Press the spacebar at the highlighted test to toggle
between select (indicated by a “DIAMOND”) and
deselect.
Note: Pressing the first letter of a test does not
activate the test, unlike menu operation.
4. Press Enter.
Running an Individual Test
To run an individual test:
1. Use the up and down arrow keys (↑ and ↓) to move
to the highlighted bar to the test you want to run.
2. Press Enter to run the test.
Note: The results of the test appear in the
lower-right-hand Test Log window. Also, if
you enabled Test Logging, the results are
recorded in the Test Log.
3. When the test completes, press Esc to return to the
Test Group Menu.
Stopping the Tests
To stop running a specific test or stop testing after you
have started a test, press Esc while the test is running.
The test pauses at the first possible opportunity, and the
Skip/Abort Test Menu appears with the following options:
Option Action
Continue The test program begins testing where
it left off.
Skip to next test The test program skips the current test,
but remaining tests for the selected
Module Tests continue.
Skip to next
group The test program skips the remaining
tests in the current test group.
Abort all tests The test program stops and returns to
the previous menu.
56 IBM Mobile Systems - ThinkPad HMM Volume 3