a.A third-wire ground connector in good condition. Use a meter to measure third-wire ground continuity for 0.1 ohm or less between the external ground pin and frame ground.

b.The power cord should be the appropriate type as specified in the parts listings.

c.Insulation must not be frayed or worn.

4.Remove the cover.

5.Check for any obvious non-IBM alterations. Use good judgment as to the safety of any non-IBM alterations.

6.Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

7.Check for worn, frayed, or pinched cables.

8.Check that the power-supply cover fasteners (screws or rivets) have not been removed or tampered with.

Handling electrostatic discharge-sensitive devices

Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge.

Notes:

1.Use product-specific ESD procedures when they exceed the requirements noted here.

2.Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective.

When handling ESD-sensitive parts:

vKeep the parts in protective packages until they are inserted into the product.

vAvoid contact with other people.

vWear a grounded wrist strap against your skin to eliminate static on your body.

vPrevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap.

vUse the black side of a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices.

vSelect a grounding system, such as those listed below, to provide protection that meets the specific service requirement.

Note: The use of a grounding system is desirable but not required to protect against ESD damage.

Attach the ESD ground clip to any frame ground, ground braid, or green-wire ground.

Use an ESD common ground or reference point when working on a double-insulated or battery-operated system. You can use coax or connector-outside shells on these systems.

Use the round ground-prong of the ac plug on ac-operated computers.

152Hardware Maintenance Manual

Page 158
Image 158
IBM 8199, 8434, 8316, 8198, 8191, 2296 manual Handling electrostatic discharge-sensitive devices

2296, 8434, 8191, 8199, 8198 specifications

IBM has been a pioneer in computing technology, and among its extensive line-up of systems, the IBM 8316, 8198, 8199, 8191, and 8434 stand out due to their unique features, advanced technologies, and robust characteristics.

The IBM 8316, often referred to as the IBM 8316 Enterprise, is designed for small to medium-sized businesses seeking reliable processing capabilities. It incorporates a powerful processor that supports high-speed data processing and multitasking. Its main feature includes a modular architecture, which allows for easy upgrades and scalability. It also comes equipped with advanced security features, ensuring that sensitive data remains protected.

The IBM 8198, part of the IBM System i series, offers a blend of both performance and reliability. Its standout characteristic is the integration of IBM's Power Systems technology, which provides exceptional performance for mid-range environments. Features such as high availability and redundancy are built into the infrastructure, allowing businesses to run mission-critical applications seamlessly. Moreover, the IBM 8198 supports a wide array of operating systems, including IBM i, which enhances its versatility for different enterprise needs.

Moving to the IBM 8199, which is well-known for its robust infrastructure, it excels in processing large volumes of transactions. One of its key attributes is the advanced virtualization capabilities that allow multiple operating systems and applications to run concurrently on a single physical machine. This not only improves resource utilization but also reduces operational costs. Businesses can benefit from its comprehensive disaster recovery features, ensuring high uptime and business continuity.

The IBM 8191 further complements this line with its focus on enterprise resource planning systems. It is designed to handle extensive data processing while featuring powerful storage solutions. The integration of AI and machine learning technologies allows businesses to analyze their data seamlessly, turning potential insights into actionable strategies.

Lastly, the IBM 8434 is significant for its high-performance capabilities and reliability. Utilized in data-intensive environments, it supports advanced analytics and business intelligence processing. Key characteristics of the 8434 include exceptional scalability, enabling organizations to grow without significant infrastructure changes. It also features robust backup and recovery features, ensuring that data integrity is maintained at all times.

Together, these IBM systems epitomize the company's commitment to providing innovative, reliable, and scalable computing solutions for businesses of all sizes. Their unique features and technologies make them integral components of modern enterprise IT environments.