46 iSeries and AS/400e System Builder
#4801 #4801 PCI Cryptographic Coprocessor
The #4801 is a hardware cryptography solution. The #4801 is a half-length PC form-factor PCI card that offers a rich
cryptography function, secure storage of cryptographic keys, and 12 Mbps performance (at the card level) for bulk data
encryption and triple DES capability.
Select the #4801 PCI Cryptographic Coprocessor for applications requiring a FIPS 140-1 certified, tamper-resistant
module for storing cryptographic keys or for financial PIN processing.
Federal Information Processing Standard (FIPS) 140-1 is a U.S. Government National Institute of Standards and
Technology (NIST) administered standard and certification program for cryptographic modules.
The #4801 is available worldwide. The level of cryptographic function is determined by the Cryptographic Access Provider
licensed program that is downloaded to the adapter. Due to temperature requirements (card temperature must not drop
below 5 degrees F (-15 degrees C)), the #4801 is shipped separately from the system in special packing.
Minimum operating system level: OS/400 V4R5
The #4801 is a Customer Install Feature.
The #4801 was withdrawn from marketing on 01 June 2006. The #4806 PCI-X Cryptographic Coprocessor is the
recommended replacement.
#4805 #4805 PCI Cryptographic Accelerator
The #4805 provides improved performance for high transaction rate secure Web applications that use the Secure Sockets
Layer (SSL) or Transport Layer Security (TLS) protocols. The process of using SSL/TLS secure Web connections is
compute intensive. The Cryptographic Accelerator can be used to off load cryptographic processing from the main CPU.
SSL/TLS secure Web connections are used to protect information (for example, credit card number) as it is transferred
over the Internet, for example between a Web browser and a server. The Cryptographic Accelerator is targeted to high
transaction rate secure Web applications using SSL/TLS.
There is a maximum of two per IOP.
Prerequisites: Available PCI card slot under a feature IOP (not under a base or embedded IOP in the system unit).
Minimum operating system level: OS/400 V5R2
The #4805 is a Customer Install Feature.
The #4805 was withdrawn from marketing on 01 June 2006
#4815 #4815 PCI ATM 155 Mbps UTP OC3
The #4815 is a 155 Mbps Asynchronous Transfer Mode PCI card that allows the iSeries or AS/400e server to be attached
to an ATM network using the Unshielded Twisted Pair (UTP-5) interface. This interface is intended for connection to both
local area switches and direct connection to service provider equipment. The #4815 is used typically where 155 Mbps
speeds are required over distances of less than 100 meters. Technical specifications and industry standards supported
are available at the ATM Forum Web site at:
http://www.atmforum.com
ATM not supported; upgrade to Ethernet
Minimum operating system level: OS/400 V4R5
The #4815 is a Customer Install Feature.
#4816 #4816 PCI ATM 155 Mbps MMF
The #4816 is a 155 Mbps ATM PCI card that allows the iSeries or AS/400e server to be attached to an ATM network using
the Multi-Mode Fiber 62.5 micron interface. This interface is intended for connection to both local area switches and direct
connection to service provider equipment. The #4816 is used typically where 155 Mbps speeds are required over distances
of less than 2 km. Technical specifications and industry standards supported are available at the ATM Forum Web site at:
http://www.atmforum.com
The #4816 can be ordered for use in OS/400 V4R5 secondary partitions. Order the #2817 PCI 155 Mbps MMF ATM IOA
for OS/400 V5R1 systems or partitions.
ATM not supported; upgrade to Ethernet
Minimum operating system level: OS/400 V4R5
The #4816 is a Customer Install Feature.